Software update - Cerebellum digi 1024

There is new software update available for Cerebellum digi 1024 controller (v.7.2)

We made quiet big overwork on the software of this product. Our aim was to make a stable working mode. Using of the controller and the information on the screen and monitor was changing only a little.

If you have software version older then 7.0 then we offer you first update the latest software version and then download the 'All data' file from our homepage and load to the controller.

The older (earlier then 7.0) all data file are not compatible with new versions (7.0 or later)!

PC-DMX/RDM Interface

With PC-DMX/RDM Interface and with its PC software together posssible to configure RGB LED Driver-s, and monitor and set any other RDM products.

 

The LED driver products are typically so installed that efter then very difficult to reach it physicaly. In this case with this interface possible to check and set parameters of LED products without reaching them physicaly, only via USB cable

RGB-3 DMX-512 Led Driver - RDM Compliant

 

The RGB-3 DMX LED DRIVER is a control module for driving LED modules. The product allows colour mixing by independently controlling lighting solutions with led’s till 300W on 12-24V power range. It is small and has compact design, easy to assembly and fixes it. Led modules are controlled by PWM (pulse with modulation) in high frequency. This high frequency guarantees flicker-free lighting comfort, and allows realising a linear dimming characteristic with fast reaction time. RDM Compliant, it means that it can be configured far from the device over DMX.

Cerebellum digi 1024

This is a universal lighting controller for control Moving heads, scanners, dimmers, smoke machines and all type of dmx receiver product, and is able to control 1024 channels using DMX 512 protocol. 1024 Unit by 48 channels, USB port, VGA port, and Pen drive as memory card. Especially developed for controlling 'LIVE' events and shows. Thanks to the configurable and numerous sliders and buttons, it is easy to program and can be fast prepare for the show. All by user configurable data such as program, fixture library, DMX addresses, etc. can be saved even to pendrive or directly to PC via USB connection.

 

 

 

 

Júliusi AKCIÓ!

Aktuális havi akciónk:

DMX Monitor - 45.000 Ft.- + ÁFA  Termékinformáció

PC DMX Interface - 10.000 Ft.- + ÁFA   Termékinformáció

Részletekért érdeklődjön a DEZELECTRIC elérhetőségein.

DMX Analyser

The DMX Analyser is able to analyze the parameters of DMX signal. It can be analyze analogue and also digital parameters. Besides we can check DMX cables, and can be possible to record DMX signals to pendrive or to any kind of USB mass storage device, and can be play back.

 

 

 

Cerebellum digi 64M

This is a universal lighting controller for control Moving heads, scanners, dimmers, smoke machines and all type of dmx unit, and is able to control 512 channels using DMX 512 protocol of which 8 channel can be set as smoke machine channels and the rest reversed for 16 intelligent units up to maximum of 32 channels each.

Cerebellum digi 128M

This is a universal lighting controller for control Moving heads, scanners, dimmers, smoke machines and all type of dmx, and is able to control 512 channels using DMX 512 protocol of which 4x8 channel can be set as smoke machine channels and the rest reversed for 16 intelligent units up to maximum of 32 channels each.

The Cerebellum digi 128M is the improved product of the 'U' version. They are similar by functions and features but for version 'M' possible to contact PENDRIVE and already some new features also included.

Syndicate content