Hívás most!
Ajánlatkérés

LED Driver 6 – six channels RDM, DALI, 0-10V led driver

The LED Driver 6 is a control module for driving LED modules with external power supply. The product allows colour mixing by independently controlling lighting solutions with led’s on DC 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

ANDROID USB HOST Interface

The ANDROID USB HOST Interface is a USB/DMX converter, which has own power supply, and it powers the connected android device. So if you use the android app light controller, the using time will be more longer then other simply USB/DMX Interfaces.

Architectural TOUCH Controller

This device was especially developed for architectural lighting control. It is an intelligent light switch with colorful graphical touch display. Its size is nearly like a light switch, but with its functions and features allowed to control the wall building light system in quiet high standard.

RDM PC DMX Interface – with isolated ports

With PC-DMX/RDM Interface 2 and with its PC software together posssible to configure RGB LED Driver-s, and monitor and set any other RDM products. This version (RDM PC DMX Interface 2) is an imporved porduct. The DMX and SUB side are isolated from each other until 1500V. On the frontside there is a built in LED to sign the power or communication process.

LED Driver 16 – 16 channels RDM, DALI led driver

The LED Driver 12 is a control module for driving LED modules. The product allows colour mixing by independently controlling lighting solutions with led’s till 300W on DC 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

DEMUX 2 – 2 channels DMX to 0-10V interface

The DEMUX-2 is an inteface, which is convert the incoming digital signal to analogue value. It has DMX-512 input. Main parameters DMX base address setting by dipswitch DMX control led. (RED) If DMX signal recived, the led blinks. POWER control led. (GREEN) In the outputs the incoming data will be converted to 0-10V signal Recommended

DEMUX 8 – digital (DMX, DALI) to analog (0-10V) converter

The DEMUX 8 is able to use for converting 8 channel input to 0-10V signal. The incoming signal can be DMX 512, or also DALI input. Most important parameters DMX base address setting by dipswitch DMX control led. (RED) If DMX signal recived, the led blinks. POWER control led. (GREEN) In the outputs the incoming

Android Wi-Fi DMX/RDM Interface

The interface can be used to sending DMX signal directly from an android device trough WiFi network. No extra WiFi router needed, the interface itself works as WiFi router.
The light controller applications are developing continuously and also new software’s will added in the future. All of the android DMX application will be used with this interface. The DEZELECTRIC DMX Application can be download form the Android market for free, so you need only buy the interface and you can use this system.

Android Ethernet DMX/RDM Interface

This interface can be used in existing WiFi network, or in separated network with using dedicated router.

The light controller applications are developing continuously and also new software’s will added in the future. All of the android DMXapplication will be used with this interface. The DEZELECTRIC DMX application can be download form the Android market for free, so you need only buy the interface and you can use this system.

CEREBELLUM Simple 512 – Lightcontroller for Android systems

New light controller for Andorid devices.

The app can be download from the market for free.

Possible to controll all 512 DMX cahannels.

CEREBELLUM RGBAW 1 – Light controller for Android systems

Light controller – especially for LED devices, but any kind of DMX capable device can be controlled.

The application can be download free from Google PLAY webstore.

DMX dipswitch calculator- free Android tool application

Download for Android devices free, developed by DEZELECTRIC. This is the DMX Calc. There are many device built with dipswitch for setting DMX address. To set dipswitch or read and understand the selected address is not simple for most of people. This nice Android tool helps to to it easy. It can be use on any android phone or tablet.
Search it on Google PLAY store on the name of DMX Calc. If you like it and find usefull, please do positive comment for this.

CEREBELLUM digi 1024 – lightcontroller

Introduction This is a universal lighting controller for control Moving heads, scanners, dimmers, smoke machines and all type of dmx receiver product, and is able to control 1024 channels using DMX 512 protocol. 1024 Unit by 48 channels, USB port, VGA port, and Pen drive as memory card. Especially developed for controlling ‘LIVE’ events and

RDM Director

With this device possible to use any kind of light controllers over RDM functions. It is usefull to configure DMX devices (which must be RDM compatible) over DMX line. Forget to try setting dip switches, clim to ladder or hang on travers. To connect this device into DMX line next to original DMX controller, and all settings can be made easily.

RDM Device Emulator

The RDE (RDM Device Emulator) is able to make non RDM compatible units to use as RDM device. With this small module possible to confugure the devices via DMX line with RDM commands. Most important possibilities: DXM addressing, mirror direction setting, add on channels like master dimmer, configuralble shuter and, measuring temerature, working hours measuring, and so on.

RDM Splitter 4

The incoming RDM and DMX signal goes to four output, anot only powered but also can be digitaly renewed. All the input and outputs are opto isolated. The four output can be configured separately from each other.

RDM Repeater (USB)

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Vie the built in USB socke its software can be upgradeed or configure.

RDM Repeater (12V adapter)

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Via the built in USB socke its software can be upgradeed or configure.

RDM Repeater (100-240V)

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Via the built in USB socke its software can be upgradeed or configure.

RDM PC DMX Interface

With PC-DMX/RDM Interface and with its PC software together posssible to configure RGB LED Driver-s, and monitor and set any other RDM products.

The LED driver products are typically so installed that efter then very difficult to reach it physicaly. In this case with this interface possible to check and set parameters of LED products without reaching them physicaly, only via USB cable.

RDM RGB3 LED DRIVER

The RDM DMX PWM RGB-3 LED DRIVER is a control module for driving LED modules. The product allows colour mixing by independently controlling lighting solutions with led’s till 300W on 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

RDM PC Director Interface

(Magyar) A készülék segítségével RDM-esíthetjük a nem RDM kompatibilis, bármilyen típusú fényvezérlő berendezésünket. Használható DMX-es eszközök konfigurálásához, beállításához a DMX kábelen keresztül a meglévő fényvezérlő pult mellől. Felejtsük el a bajlódást a dipkapcsolókkal, a létrázást, vagy a traverzre mászkálást. Ezzel az eszközzel a DMX vonalra való csatlakozással elérhetjük, és módosíthatjuk az eszközeink beállításait. Funkciójában megegyezik az RDM Director termékkel, azonban nem tartalmaz kezelőszervet, hanem az USB-n keresztül egy PC-s programmal működik, mely honlapunkról letölthető.

DMX Analyser

The DMX Analyser is able to analyze the parameters of DMX signal. It can be analyze analogue and also digital parameters. Besides we can check DMX cables, and can be possible to record DMX signals to pendrive or to any kind of USB mass storage device, and can be play back.

PC-DMX Interface

A PC-DMX Interface szoftverrel, és a PC-DMX Interface eszközzel lehetőségünk van arra, hogy DMX jelet állítsunk elő a számítógép segítségével.
Az interfész eszköz használható a Free styler elnevezésű programmal együtt. Ez a program tulajdonképpen egy PC-s fényvezérlő.
Csatorna kapacitás: 512 csatorna, egy DMX-512 kimeneten.

RFM-DMX Interface

Solution for wireless DMX transmission. The RFM-DMX Interface convert the wired DMX signal to radio signal, and the receiver modules convert it back to wired signal. It has more advanteges next to spare cables. The outgoing DMX signal is powered and renewed. The price is apply to one transmitter or one receiver module!

DMX Monitor Driver

(Magyar) Már nem csak a nagypultok sajátossága: Monitor, egér, és billentyűzet csatlakoztatása a fényvezérlőkhöz!
Bármilyen típusú dmx-es vezérlő kimenetéből a dmx jelet az eszközbe bevezetve, a hozzá csatlakoztatott monitor képernyőjén az adatok megjelenítődnek.

CEREBELLUM digi 128M – lightcontroller

This is a universal lighting controller for control Moving heads, scanners, dimmers, smoke machines and all type of dmx, and is able to control 512 channels using DMX 512 protocol of which 4×8 channel can be set as smoke machine channels and the rest reversed for 16 intelligent units up to maximum of 32 channels each.

DEMUX 2 RTP – 2channels DMX to 0-10V interface

(Magyar) DMX-512-es jellel vezérelt 230V-os relés kapcsoló, valamint DMX-512-ről 0-10V-os átalakító.
Bitkapcsoló segítségével bármely címtől kezdve vesz 1 csatornát. A DMX és a tápfeszültség meglétét kontrol led jelzi.
A kimeneten a vett dmx érték (0-255) átalakított formában jelenik meg (arányosan 0-10V) a JACK csatlakozón.

DEMUX 24 – 24 channels DMX to 0-10V interface

(Magyar) DMX-512 / 0-10V -os átalakító, azaz 0-10V-al vezérelhető készülékekhez csatlakoztatva azokat már immár DMX-en keresztül lehet vezérelni.
Bitkapcsoló segítségével bármely címtõl kezdve vesz 24 csatornát. A DMX jel és a tápfeszültség meglétét kontrol led jelzi.

MUX 24 – 24 channels 0-10V to DMX interface

(Magyar) 0-10V / DMX-512-es átalakító, azaz 0-10V-os jeleket DMX-512-es jelre alakítja. Bitkapcsoló segítségével bármely címtől kezdve adja a 24 csatornát.
A tápfeszültség meglétét kontrol led jelzi (amennyiben nem világít nincs tápfeszültség). A kimeneten a vett analóg jel átalakított formában jelenik meg a dmx vonalon(arányosan 0-255).

MINISCAN 12 – lightcontroller

(Magyar) A Miniscan-12 egy egyszerűen kezelhető DMX-512-es fényvezérlő, kis számú DMX-es egység vezérléséhez. Egyszerű kezelőfelület, kis méret, egyszerű de gyors programozhatóság jellemzi. Alkalmas kis diszkók, pub-ok fényvezérléséhez, ahol kis (4-6-10) csatornaszámú eszközök vannak.

RGB Controller – lightcontroller

(Magyar) Minden típusú RGB-s lámpa vezérléséhez, mint RGB csövek, RGB Dimmerek, RGB PAR lámpák, 8 készülékig, készülékenként akár maximum 24 csatornával. Két működési mód: egyszerű, és haladó üzemmód. Egyszerű üzemmódban könnyedén állítható és programozható egy RGB-s eszköz.
Haladó módban beállítások sokaságával lehet a végletekig konfigurálni a vezérlőt.

Simple 14 – lightcontroller

It is a simply to use light controller. It has standardized DMX-512 output and any kind of DMX device can be controller until 28 channels. The channels can be directly controlled with 14 sliders, and with help of the select button possible to change between controlling of 1-14 channels or 15-24 channels.