This device was especially developed for architectural lighting control. It is an intelligent light switch with colorful graphical touch display. Its size is nearly like a light switch, but with its functions and features allowed to control the wall building light system in quiet high standard.

With PC-DMX/RDM Interface 2 and with its PC software together posssible to configure RGB LED Driver-s, and monitor and set any other RDM products. This version (RDM PC DMX Interface 2) is an imporved porduct. The DMX and SUB side are isolated from each other until 1500V. On the frontside there is a built in LED to sign the power or communication process.

The LED Driver 12 is a control module for driving LED modules. The product allows colour mixing by independently controlling lighting solutions with led’s till 300W on DC 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

The DEMUX-2 is an inteface, which is convert the incoming digital signal to analogue value. It has DMX-512 input. Main parameters DMX base address setting by dipswitch DMX control led. (RED) If DMX signal recived, the led blinks. POWER control led. (GREEN) In the outputs the incoming data will be converted to 0-10V signal Recommended

The DEMUX 8 is able to use for converting 8 channel input to 0-10V signal. The incoming signal can be DMX 512, or also DALI input. Most important parameters DMX base address setting by dipswitch DMX control led. (RED) If DMX signal recived, the led blinks. POWER control led. (GREEN) In the outputs the incoming

The interface can be used to sending DMX signal directly from an android device trough WiFi network. No extra WiFi router needed, the interface itself works as WiFi router.
The light controller applications are developing continuously and also new software’s will added in the future. All of the android DMX application will be used with this interface. The DEZELECTRIC DMX Application can be download form the Android market for free, so you need only buy the interface and you can use this system.

This interface can be used in existing WiFi network, or in separated network with using dedicated router.

The light controller applications are developing continuously and also new software’s will added in the future. All of the android DMXapplication will be used with this interface. The DEZELECTRIC DMX application can be download form the Android market for free, so you need only buy the interface and you can use this system.

Introduction This is a universal lighting controller for control Moving heads, scanners, dimmers, smoke machines and all type of dmx receiver product, and is able to control 1024 channels using DMX 512 protocol. 1024 Unit by 48 channels, USB port, VGA port, and Pen drive as memory card. Especially developed for controlling ‘LIVE’ events and

The incoming RDM and DMX signal goes to four output, anot only powered but also can be digitaly renewed. All the input and outputs are opto isolated. The four output can be configured separately from each other.

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Vie the built in USB socke its software can be upgradeed or configure.

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Via the built in USB socke its software can be upgradeed or configure.

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Via the built in USB socke its software can be upgradeed or configure.

With PC-DMX/RDM Interface and with its PC software together posssible to configure RGB LED Driver-s, and monitor and set any other RDM products.

The LED driver products are typically so installed that efter then very difficult to reach it physicaly. In this case with this interface possible to check and set parameters of LED products without reaching them physicaly, only via USB cable.

The RDM DMX PWM RGB-3 LED DRIVER is a control module for driving LED modules. The product allows colour mixing by independently controlling lighting solutions with led’s till 300W on 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

(Magyar) A készülék segítségével RDM-esíthetjük a nem RDM kompatibilis, bármilyen típusú fényvezérlő berendezésünket. Használható DMX-es eszközök konfigurálásához, beállításához a DMX kábelen keresztül a meglévő fényvezérlő pult mellől. Felejtsük el a bajlódást a dipkapcsolókkal, a létrázást, vagy a traverzre mászkálást. Ezzel az eszközzel a DMX vonalra való csatlakozással elérhetjük, és módosíthatjuk az eszközeink beállításait. Funkciójában megegyezik az RDM Director termékkel, azonban nem tartalmaz kezelőszervet, hanem az USB-n keresztül egy PC-s programmal működik, mely honlapunkról letölthető.

The DMX Analyser is able to analyze the parameters of DMX signal. It can be analyze analogue and also digital parameters. Besides we can check DMX cables, and can be possible to record DMX signals to pendrive or to any kind of USB mass storage device, and can be play back.

A PC-DMX Interface szoftverrel, és a PC-DMX Interface eszközzel lehetőségünk van arra, hogy DMX jelet állítsunk elő a számítógép segítségével.
Az interfész eszköz használható a Free styler elnevezésű programmal együtt. Ez a program tulajdonképpen egy PC-s fényvezérlő.
Csatorna kapacitás: 512 csatorna, egy DMX-512 kimeneten.

Solution for wireless DMX transmission. The RFM-DMX Interface convert the wired DMX signal to radio signal, and the receiver modules convert it back to wired signal. It has more advanteges next to spare cables. The outgoing DMX signal is powered and renewed. The price is apply to one transmitter or one receiver module!

(Magyar) Már nem csak a nagypultok sajátossága: Monitor, egér, és billentyűzet csatlakoztatása a fényvezérlőkhöz!
Bármilyen típusú dmx-es vezérlő kimenetéből a dmx jelet az eszközbe bevezetve, a hozzá csatlakoztatott monitor képernyőjén az adatok megjelenítődnek.

This is a universal lighting controller for control Moving heads, scanners, dimmers, smoke machines and all type of dmx, and is able to control 512 channels using DMX 512 protocol of which 4×8 channel can be set as smoke machine channels and the rest reversed for 16 intelligent units up to maximum of 32 channels each.

(Magyar) DMX-512-es jellel vezérelt 230V-os relés kapcsoló, valamint DMX-512-ről 0-10V-os átalakító.
Bitkapcsoló segítségével bármely címtől kezdve vesz 1 csatornát. A DMX és a tápfeszültség meglétét kontrol led jelzi.
A kimeneten a vett dmx érték (0-255) átalakított formában jelenik meg (arányosan 0-10V) a JACK csatlakozón.

(Magyar) DMX-512 / 0-10V -os átalakító, azaz 0-10V-al vezérelhető készülékekhez csatlakoztatva azokat már immár DMX-en keresztül lehet vezérelni.
Bitkapcsoló segítségével bármely címtõl kezdve vesz 24 csatornát. A DMX jel és a tápfeszültség meglétét kontrol led jelzi.

(Magyar) 0-10V / DMX-512-es átalakító, azaz 0-10V-os jeleket DMX-512-es jelre alakítja. Bitkapcsoló segítségével bármely címtől kezdve adja a 24 csatornát.
A tápfeszültség meglétét kontrol led jelzi (amennyiben nem világít nincs tápfeszültség). A kimeneten a vett analóg jel átalakított formában jelenik meg a dmx vonalon(arányosan 0-255).

It is a simply to use light controller. It has standardized DMX-512 output and any kind of DMX device can be controller until 28 channels. The channels can be directly controlled with 14 sliders, and with help of the select button possible to change between controlling of 1-14 channels or 15-24 channels.