The LED Driver 6 is a control module for driving LED modules with external power supply. The product allows colour mixing by independently controlling lighting solutions with led’s on DC 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

This device was especially developed for architectural lighting control. It is an intelligent light switch with colorful graphical touch display. Its size is nearly like a light switch, but with its functions and features allowed to control the wall building light system in quiet high standard.

The LED Driver 12 is a control module for driving LED modules. The product allows colour mixing by independently controlling lighting solutions with led’s till 300W on DC 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

The DEMUX-2 is an inteface, which is convert the incoming digital signal to analogue value. It has DMX-512 input. Main parameters DMX base address setting by dipswitch DMX control led. (RED) If DMX signal recived, the led blinks. POWER control led. (GREEN) In the outputs the incoming data will be converted to 0-10V signal Recommended

The interface can be used to sending DMX signal directly from an android device trough WiFi network. No extra WiFi router needed, the interface itself works as WiFi router.
The light controller applications are developing continuously and also new software’s will added in the future. All of the android DMX application will be used with this interface. The DEZELECTRIC DMX Application can be download form the Android market for free, so you need only buy the interface and you can use this system.

This interface can be used in existing WiFi network, or in separated network with using dedicated router.

The light controller applications are developing continuously and also new software’s will added in the future. All of the android DMXapplication will be used with this interface. The DEZELECTRIC DMX application can be download form the Android market for free, so you need only buy the interface and you can use this system.

The incoming RDM and DMX signal goes to four output, anot only powered but also can be digitaly renewed. All the input and outputs are opto isolated. The four output can be configured separately from each other.

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Vie the built in USB socke its software can be upgradeed or configure.

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Via the built in USB socke its software can be upgradeed or configure.

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Via the built in USB socke its software can be upgradeed or configure.

With PC-DMX/RDM Interface and with its PC software together posssible to configure RGB LED Driver-s, and monitor and set any other RDM products.

The LED driver products are typically so installed that efter then very difficult to reach it physicaly. In this case with this interface possible to check and set parameters of LED products without reaching them physicaly, only via USB cable.

The RDM DMX PWM RGB-3 LED DRIVER is a control module for driving LED modules. The product allows colour mixing by independently controlling lighting solutions with led’s till 300W on 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

A PC-DMX Interface szoftverrel, és a PC-DMX Interface eszközzel lehetőségünk van arra, hogy DMX jelet állítsunk elő a számítógép segítségével.
Az interfész eszköz használható a Free styler elnevezésű programmal együtt. Ez a program tulajdonképpen egy PC-s fényvezérlő.
Csatorna kapacitás: 512 csatorna, egy DMX-512 kimeneten.

Solution for wireless DMX transmission. The RFM-DMX Interface convert the wired DMX signal to radio signal, and the receiver modules convert it back to wired signal. It has more advanteges next to spare cables. The outgoing DMX signal is powered and renewed. The price is apply to one transmitter or one receiver module!

(Magyar) DMX-512-es jellel vezérelt 230V-os relés kapcsoló, valamint DMX-512-ről 0-10V-os átalakító.
Bitkapcsoló segítségével bármely címtől kezdve vesz 1 csatornát. A DMX és a tápfeszültség meglétét kontrol led jelzi.
A kimeneten a vett dmx érték (0-255) átalakított formában jelenik meg (arányosan 0-10V) a JACK csatlakozón.