The LED Driver 6 is a control module for driving LED modules with external power supply. The product allows colour mixing by independently controlling lighting solutions with led’s on DC 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

This device was especially developed for architectural lighting control. It is an intelligent light switch with colorful graphical touch display. Its size is nearly like a light switch, but with its functions and features allowed to control the wall building light system in quiet high standard.

With PC-DMX/RDM Interface 2 and with its PC software together posssible to configure RGB LED Driver-s, and monitor and set any other RDM products. This version (RDM PC DMX Interface 2) is an imporved porduct. The DMX and SUB side are isolated from each other until 1500V. On the frontside there is a built in LED to sign the power or communication process.

The LED Driver 12 is a control module for driving LED modules. The product allows colour mixing by independently controlling lighting solutions with led’s till 300W on DC 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

The DEMUX 8 is able to use for converting 8 channel input to 0-10V signal. The incoming signal can be DMX 512, or also DALI input. Most important parameters DMX base address setting by dipswitch DMX control led. (RED) If DMX signal recived, the led blinks. POWER control led. (GREEN) In the outputs the incoming

The interface can be used to sending DMX signal directly from an android device trough WiFi network. No extra WiFi router needed, the interface itself works as WiFi router.
The light controller applications are developing continuously and also new software’s will added in the future. All of the android DMX application will be used with this interface. The DEZELECTRIC DMX Application can be download form the Android market for free, so you need only buy the interface and you can use this system.

This interface can be used in existing WiFi network, or in separated network with using dedicated router.

The light controller applications are developing continuously and also new software’s will added in the future. All of the android DMXapplication will be used with this interface. The DEZELECTRIC DMX application can be download form the Android market for free, so you need only buy the interface and you can use this system.

With this device possible to use any kind of light controllers over RDM functions. It is usefull to configure DMX devices (which must be RDM compatible) over DMX line. Forget to try setting dip switches, clim to ladder or hang on travers. To connect this device into DMX line next to original DMX controller, and all settings can be made easily.

The RDE (RDM Device Emulator) is able to make non RDM compatible units to use as RDM device. With this small module possible to confugure the devices via DMX line with RDM commands. Most important possibilities: DXM addressing, mirror direction setting, add on channels like master dimmer, configuralble shuter and, measuring temerature, working hours measuring, and so on.

The incoming RDM and DMX signal goes to four output, anot only powered but also can be digitaly renewed. All the input and outputs are opto isolated. The four output can be configured separately from each other.

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Vie the built in USB socke its software can be upgradeed or configure.

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Via the built in USB socke its software can be upgradeed or configure.

The incoming RDM and DMX signal goes to output, and not only powered but also can be digitaly renewed. All the input and output are opto isolated. Via the built in USB socke its software can be upgradeed or configure.

With PC-DMX/RDM Interface and with its PC software together posssible to configure RGB LED Driver-s, and monitor and set any other RDM products.

The LED driver products are typically so installed that efter then very difficult to reach it physicaly. In this case with this interface possible to check and set parameters of LED products without reaching them physicaly, only via USB cable.

The RDM DMX PWM RGB-3 LED DRIVER is a control module for driving LED modules. The product allows colour mixing by independently controlling lighting solutions with led’s till 300W on 12-24V power range. It is small and has compact design, easy to assembly and fixes it.

(Magyar) A készülék segítségével RDM-esíthetjük a nem RDM kompatibilis, bármilyen típusú fényvezérlő berendezésünket. Használható DMX-es eszközök konfigurálásához, beállításához a DMX kábelen keresztül a meglévő fényvezérlő pult mellől. Felejtsük el a bajlódást a dipkapcsolókkal, a létrázást, vagy a traverzre mászkálást. Ezzel az eszközzel a DMX vonalra való csatlakozással elérhetjük, és módosíthatjuk az eszközeink beállításait. Funkciójában megegyezik az RDM Director termékkel, azonban nem tartalmaz kezelőszervet, hanem az USB-n keresztül egy PC-s programmal működik, mely honlapunkról letölthető.